Call for Pricing (888) 501-1355

1926.1400 Ground Conditions

On-site Training
ground conditions

  • (a)Definitions.
    • (1)“Ground conditions” means the ability of the ground to support the equipment (including slope, compaction, and firmness).
    • (2)“Supporting materials” means blocking, mats, cribbing, marsh buggies (in marshes/wetlands), or similar supporting materials or devices.
  • (b) The equipment must not be assembled or used unless ground conditions are firm, drained, and graded to a sufficient extent so that, in conjunction (if necessary) with the use of supporting materials, the equipment manufacturer’s specifications for adequate support and degree of level of the equipment are met. The requirement for the ground to be drained does not apply to marshes/wetlands.
  • (c) The controlling entity must:
    • (1) Ensure that ground preparations necessary to meet the requirements in paragraph (b) of this section are provided.
    • (2) inform the user of the equipment and the operator of the location of hazards beneath the equipment setup area (such as voids, tanks, utilities) if those hazards are identified in documents (such as site drawings, as-built drawings, and soil analyses) that are in the possession of the controlling entity (whether at the site or offsite) or the hazards are otherwise known to that controlling entity.
  • (d) If there is no controlling entity for the project, the requirement in paragraph (c)(l) of this section must be met by the employer that has authority at the site to make or arrange for ground preparations needed to meet paragraph (b) of this section.
  • (e) lf the A/D director or the operator determines that ground conditions do not meet the requirements in paragraph (b) of this section, that persons employer must have a discussion with the controlling entity regarding the ground preparations that are needed so that, with the use of suitable supporting materials/devices (if necessary). the requirements in paragraph (b) of this section can be met.
  • (f) This section does not apply to cranes designed for use on railroad tracks when used on railroad tracks that are part of the general railroad system of transportation that is regulated pursuant to the Federal Railroad Administration under 49 CFR part 213 and that comply with applicable Federal Railroad Administration requirements.

Follow Us On Our Socials


Payments Accepted
Credit Card Icons
Our History
All Purpose Crane Training instructors combined brings over 100 years of training and field experience. We strive to deliver the highest standard of quality crane certification training.

OSHA Verified Vendor Icons
company-logos

An All Purpose Safety Training Solutions Company